Since the main component of the cone crusher
is steel, it is easy to rust. The rusted machine will affect the normal operation and easily cause economic losses. Therefore, reasonable maintenance and storage are the key:
1. If the flywheel of the cone crusher has been removed from the eccentric shaft, the contact surface between the flywheel and the shaft should be coated with anti-corrosion agent.
2. During storage or seasonal shutdown of the cone crusher, run the cone crusher at least once a month to ensure that the bearings are properly lubricated. If the cone crusher cannot be operated during storage, you need to manually rotate the cone crusher flywheel 3 to 4 times to ensure that the bearings are properly lubricated. If necessary, add grease to the bearing.
3. When the cone crusher is taken out of the storage place, it is necessary to check the painting condition and repair it as needed. Before assembling the cone crusher, the preservative should be removed from all contact surfaces.
4. The cone crusher and its removed parts should be stored on a stable support to prevent contact with the ground.