Analysis of the Causes of Cone Crusher Oil Temperature Rising

In the production process of the cone crusher, if the lubricating oil temperature is high, it will cause a decline in the lubrication effect. At this time, the machine cannot operate normally, which will seriously affect the production process. In view of this situation , we need to find the phenomenon of oil temperature rise in time.
 

1. The lubricating oil circulation is not smooth due to the blockage of the oil return pipe, the amount of oil return is small, and the oil temperature is high. Lubricating oil circulates smoothly, reducing the factors of high oil temperature.

2. The failure of the lubricating oil will also cause the oil temperature to rise. If the lubricating oil used in the production of the cone crusher contains moisture, dust and other pollutants, then the expected lubricating effect cannot be achieved, and these impurities It will cause abnormal wear and tear inside the equipment, which will cause the oil temperature to rise. The solution at this time is to replace the lubricating oil. When replacing, the oil tank should be cleaned first, and then replaced, so as to ensure the cleanliness of the lubricating oil. To prevent the failure of the cone crusher lubrication and high temperature caused by pollution.

3. The contact area between the bowl-shaped tile surface and the main shaft body is large, and poor contact will also cause the high temperature phenomenon of the lubricating oil. The reason for the poor contact between the two is mainly because the main shaft body of the cone crusher has a long service life and the outer spherical surface Wear and tear is serious, when wearing down to lower spherical surface non-contact surface step, can cause body inner edge non-contact ball mill to contact with bowl-shaped tile, and then cause the rising phenomenon of having temperature.