Impact crusher is commonly used in secondary crushing, but also the system of mandatory equipment of sand production line, impact crusher is a more traditional and irreplaceable crushing equipment plays an important role in the production line in the sand.
General sand production line process is that, the * step is supplied by a feeder to jaw crusher, then the impact crusher, jaw crusher, where the role is to bulk materials after breaking into the crusher, the particles reach 20-60mm between customer needs, the use of high-speed rotation of the rotor plate hammer on, into the crushing chamber materials for generating high-speed impact and crushing, and so crushed material tangentially to the above-described process of rapid crushing threw the other end of the chamber back plate, to be broken again, and then from the back plate to plate hammer rebound, continue to repeat.
Also Jiaozuo Zhongxin remind you that when you buy the crusher,at the same time, you need to know which are wearing parts, because the bulk material crushing process will wear liner, back plate, during the replacement procedure must follow the principle, after the * open shelves the shelves and in the box after connecting bolt removed, and then use the wrench to the hex head portion of the clamshell device, and then slowly open shelves. In the meantime, you can use the rack above the hanging device racks hanging back. Repeat the process, that is, after closing on the shelves. Counterattack broken boards hammer wear to a certain extent should be timely adjusted or replaced to avoid damage to the fasteners and other components, resulting in greater losses.