Introduction to four aspects of cone crusher maintenance
In ore production, cone crushers can cause some failures. Some failures are caused by necessary features, but some can be avoided. The following will introduce the maintenance work of the cone crusher and effectively avoid mechanical failure.
Cone crusher bearings are lubricated. In the crushing process of the cone crusher machine, the high hardness ore will withstand greater friction and various impact forces. The bearing is the main part of the load, so pay attention to this place. Although the cone crusher has a good lubrication system, it should be noted that the amount of lubricating oil should be checked before starting the machine.
Check whether the machine parts are loose. When the cone crusher crushes the ore materials, the ore can easily damage the working parts. Loose parts are one of the manifestations of the machine. It is affected or caused by ore, or directly affected by working parts. Before starting the machine, it is necessary to check whether the working parts are loose. If the looseness is not checked, the machine will vibrate during operation.
Replace worn parts in time. The movable cone plate and the fixed cone plate are the main wear parts of the cone crusher machine. Materials in direct contact. One is the crushed material, and the other is the wear of the lower plate of the closure protection component. For these two parts, it is necessary to regularly check the wear and tear and replace the motherboard in time.
Control the temperature and oil temperature of the machine bearings. The bearing temperature and oil temperature of the cone crusher exceed the normal value, and there may be other materials in the bearing. If the temperature is always high, you need to s* and check.