First, before the cone crusher is officially started, we must do a good job of inspection, especially the lubrication of bearing components and the cleaning of bearing components. The main thing is to check whether the surface of the cone crusher has a strong adhesion. Of course, when cleaning, you also need to pay attention to the cleaning method. If some dirt cannot be washed with water, we can use some neutral cleaners for cleaning. Of course, in the process of using the cone crusher, it should also be used correctly. In particular, it must be ensured that the bearing will not cause excessive impact on the bearing during operation. At the same time, during the operation, it is necessary to check whether there is any abnormality in the bearing part, such as whether the rotation is abnormal, and whether there is noise?
In addition, in the process of using a cone crusher, it is also important to perform rust prevention treatment on the bearing components. It is necessary to avoid some water entering the bearing. Of course, if you want to prevent the bearing surface from getting wet, you can wear gloves during operation, which can prevent water from falling from the bearing surface to a large extent.
When the cone crusher works, the key is not to dry the machine. We know that this kind of crusher needs to work in the process of producing sand and gravel. If the machine's machine parts are dry, the running speed of the gravel equipment will be greatly affected. Before the machine fails, the performance of the machine will become worse and worse. A good maintenance method is to regularly place industrial lubricants on the machine to make the lubricant wet, to maintain the machine's stability and speed, and to maintain the crushing stone production efficiency of the cone crusher.