Shaking Table

  • Max.feeding size: 2MM
  • Feeding amount: 30-60 ( T/d)
  • Frequency : 15-48 (F)
  • Water quantity : 80-150 (T/d)
  • Portrait obliquity : 1.4 (%)
  • Motor power : 1.1 (KW)

We're here to help:

Easy ways to get the answers you need.

(※ Click this button to inquiry)
share with: Bookmark and Share
  • Shaking table
►  Introduction

This table is mainly suitable for ore, but also for dealing with slime. The adjusting range of horizontal gradient is larger (0°-10°). Adjusting the stroke is easy, it can still keep bed move smoothly, when adjust horizontal slope and stroke. Spring is placed within the chassis and very tight, which is advantage of 6 S shaking table. The defects of shaker is that precision of installation is very high, the structure of bedside is very complex, quick-wear parts is enormous. It is very easy to break the rod when you operate wrongly. The advanced shaker has gear shaft pump outside the box and small engine oil avoid leaking oil.


►  Main structure

The dressing table is mainly composed of eight components, the head of bed, motor, slope, bed surface, trough, water tank, and lubrication system.


►  Application area

It is widely used in separating tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal. It can be used for roughing, selection, and choose different operations, such as selecting coarse sand (2-0.5 mm), fine sand (0.5- 0.074 mm), slime(-0.074) and so on. Dressing table can also be used to choose iron, manganese ore and coal. When processing the minerals, such as tungsten, tin, the recycling particle size of shaker is 2-0.22 mm.




► Feature

1,Rich ore ratio
 2,Easy to guard
3,Easy to adjust the stroke
4,Still keep bed stable when change horizontal slope and stroke
5,Spring is placed in box, structure is complex
6, Have finished ore and tailings
■Technical Data
Name Unit Grit concentrator table Fine sand concentrator table Sludge concentrator table
Dimensions Length MM 4450 4450 4450


Driving part width MM 1855 1855 1855


Concentrate part width MM 1546 1546 1546
Max.feeding size MM 2 0.5 0.15
Feeding amount T/d 30-60 10-20 15-25
Feeding thickness % 25-30 20-25 15-25
Journey MM 16-22 11-16 8-16
Frequency F 15-48 48-53 50-57
Water quantity T/d 80-150 30-60 10-17
Horizontal obliquity Degree 2.5-4.5 1.5-3.5 1-2
Portrait obliquity % 1.4 0.92 ----
Table board corner Degree 32-42 40 42
Concentrating square ---- 7.6 7.6 7.6
Table board length ratio ---- 2.6 2.6 2.6
Motor power KW 1.1 1.1 1.1
Inquiry >>
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :